Research

Ben Pine and Bryan Jones of the ISIS synchrotron group

Ben Pine and Bryan Jones of the ISIS synchrotron group discussing beam diagnostics modelling.
View full-size image

Each section of the ISIS machine is looked after by a highly skilled and experienced team.

Ion sourcery

Originally based on Russian technology, the ISIS ion source works by generating a discharge plasma in hot hydrogen gas fed with caesium vapour. The aim is make the discharge as negative as possible to create the H- ions which offer the easiest way of feeding particles into the synchrotron accelerator. “We are now the leading operators and developers of this type of ion source,” says Dan Faircloth, head of the ion source section. The ion sources last for between 20 and 30 days before they have to replaced. “Keeping the source in optimum condition is often called ion sourcery,” says Dan. “We have to maintain the discharge in chaotic equilibrium to produce as many H- ions as possible. If you switch off the ion source and then start it up again, its behaviour changes. They are fickle beasts, which is what makes the ion-source technicians superstitious. They don’t like to talk about a source because they think it can hear you,” he jokes. Sometimes the ion source has to be changed in the middle of the night which can take up to three hours. A collection of 10 sources, which are made at ISIS, is kept ready to go. “We are building up a database of operating conditions and failure modes so we can improve reliability,” says Dan.

 

Protons on target 

Neutron production also depends upon the target systems being kept in good condition. Although a target lasts up to five years, the surrounding liquid-methane moderators (for TS1), which slow down the neutrons, do degrade and have to be changed every other run cycle. Because the whole system becomes radioactive, changing the moderator requires a remote handling cell. “Special suits and breathing apparatus are required while we equip the cells with tools and cameras,” says Dave Haynes of the Targets Section. The heavily shielded cell is evacuated and sealed and the target is moved into the cell equipped with manipulator arms. “It is complicated but we’ve done it so many times that it is routine,” says Dave.

 

Setting up and monitoring the accelerator 

Maintaining the machine performance is essential to providing optimum experimental conditions for users. The job of Dean Adams and his team is to set up the accelerator for each user run. The whole facility works under extremely tight tolerances. The proton beam must remain very stable, which means that, for example, power supplies must be stable to within 0.01 per cent. Any loss of beam as a result of it hitting the accelerator sides will directly affect the quality of the final experimental beams, as well as damaging the machine. “We provide on-call 24-hour support for any operational problems,” says Dean. We establish where the problem is and call out the relevant crew to fix it.” Sarah Whitehead and Tony Kershaw of the Diagnostics Section monitor the location of every proton pulse via beam-loss monitors situated along the synchrotron. “If there are three consecutive pulses that are outside the tolerances, we switch the machine off,” says Tony. If this is due to a power loss, then the electrical crew will be called in to investigate. “We aim for at least 90-per-cent availability of the machine for over the 40 to 50 days of user time,” he adds.

 

Staying In control 

The routine running of the accelerator is monitored from the ISIS Main Control Room by a duty officer and three assistants working in three daily shifts, 365 days a year. Duty officer Tom Noone says to maintain the machine at maximum efficiency requires experience and is a bit of a ‘black art’. “You know how the machine should run and I might give it a ‘tweak’ from time to time depending on how it’s running.” he says. One of the team regularly tours the site carrying out routine checks on components such as the moderators. “We are all electronics engineers so if a piece of equipment goes off in the middle of the night, we will attempt a first fix before calling in a specialist”, adds Tom.

 

Neutrons for the chop

Once the neutron beams are generated, they must be in the right energy range for a particular experiment. This is achieved by using rotating devices called choppers which block unwanted neutrons. ISIS uses several kinds of chopper, the simplest being a blade which sits just beyond the target and rotates at the same frequency as the neutron pulses. It eliminates high-energy, fast-moving neutrons while letting the bulk of them through. Further down the beamlines are disc choppers with slots that allow neutrons in selected energy bands to pass. Some choppers consist of counter-rotating discs which open and close an aperture like a pair of curtains. These might be set up to allow only every other pulse through (at half the frequency of 25 times a second). This allows the longest-wavelength neutrons to be selected for SANS experiments (p.xx). Tim Carter designs, develops and maintains the chopper drive-systems including new designs for TS-2. “ISIS is leading the way in chopper development. We have dramatically improved their reliability – essential for achieving good experimental results”, he comments.

 

Scintillating work

Each neutron instrument consists of many components, each of which is looked after and developed by groups within ISIS. For example, ISIS develops its own neutron detector arrays, which comprise mainly gas and scintillating devices. The latter consist of material that emits light when neutrons impinge on it. The light is then transmitted via thousands of optical fibres encoded in a position-sensitive way. Brian Holland, who has been working on detector designs at ISIS for a decade, has been involved in upgrading the detectors. “Scintillators are a bit of a speciality here; they are massive and require very careful work but are great fun to build,” he enthuses.

Bookmark and Share
Skip to the top of the page