TS2 (R80) Instrument Room

The Instrument Room is located in the west side of TS2 (R80) and houses differential scanning calorimetry equipment.

All the sample preparation equipment you will need for the following instruments (pan presses, microbalance etc) are located in the same room. Further laboratory equipment can be found in the chemistry laboratory next door. 

Mettler Toledo DSC1

The Mettler Toledo DSC1 with PC and LNCS

The Mettler Toledo DSC1 with its PC and liquid nitrogen dewar in the TS2 (R80) Instrument Room.
View full-size image

The DSC1 is a fully automated thermal analysis instrument for investigating enthalpic changes in your samples.

  • Operating range from -150 to 700 °C
  • Liquid nitrogen cooling system for low temperature measurements
  • Argon purge gas
  • 34-position autosampler with an internal reference position
  • Pre-programmed or entirely user-defined experimental methods

Manufacturer's details

TA Instruments DSC Q2000

The DSC Q2000 in the Instrument Room.

The TA Instruments DSC Q2000 with its PC and liquid nitrogen dewar in the TS2 (R80) Instrument Room.
View full-size image

The DSC Q2000 is the second of our two research-grade thermal analysis instruments in the instrument room. 

  • Operating range from -180 to 450 °C
  • Liquid nitrogen cooling system for low temperature measurements
  • Nitrogen & helium purge gas
  • 50-position autosampler with 5 reference positions
  • Pre-programmed or entirely user-defined experimental methods
  • Thermal Advantage Platinum software for ease-of-use

Manufacturer's details

Bookmark and Share
Skip to the top of the page