Fire

If you hear the fire alarm then leave the building by the nearest available emergency exit and make your way to the appropriate assembly point (shown on the map below).

If you see flames or smoke then:

1.   Leave the building by the nearest available fire exit and press a break glass switch on your way out to sound the alarm.

2.   Ring 2222 to alert security and tell them where the fire is.

The map below shows the fire alarm assembly points on either side of the experimental halls.

 

Fire Assembly Points

Fire Assembly Points
View full-size image

 

 

Target Station 1 (R55)

On the North side - nearest the foyer - this is next to the floodlights.

On the South side - the assembly point in the car park next to the HRPD beamline.

Target Station 2 (R80)

On the East side - the assembly point in the car park at the end of the main entrance bridge

On the West side – West side of the building as marked on the map above

 The fire alarm alarm takes the form of a continuous bell

Next

Fire alarm by isisneutronmuon
Bookmark and Share
Skip to the top of the page